How to easily clean the surface of the stone plastic UV panel

With the wide application of stone plastic UV board in people's lives, stone plastic UV board has become a beautiful scenery in people's lives. I believe that many people who use stone plastic UV board will be troubled by how to clean. Old stone plastic UV panels generally have stains, mud blocks and even a thick layer of dirt. So what to do after the stone plastic UV board produces dirt? Let's take a look at how to simply clean the surface of the stone plastic UV board!

Step 1: Use a funnel to fill the spray bottle with distilled water.

Step 2: Gently spray distilled water on the surface of the stone plastic UV panel.

Step 3: Sprinkle a thick layer of white powder onto the surface of the stone plastic UV board.

Step 4: Let the powder sit for 24 hours.

Step 5: Use a clean, soft cloth to wipe off the white powder and sweep it into a garbage bag.

Step 6: If the stain remains on the surface of the stone plastic UV panel, repeat steps 2 to 5.

Step 7: Mix 1 teaspoon of mild dishwashing soap and warm water in a small bowl.

Step 8: Soak a soft cloth in warm soapy water. Wring out excess moisture.

Step 9: Wipe the surface of the stone plastic UV board with a damp cloth to completely remove the white powder and grease residue.

Step 10: Wipe the surface of the stone plastic UV board with a dry soft cloth.

Precautions for UV marble care:

1. Powdered cleaners will scratch or damage the stone plastic UV board, so it is best not to use this type of cleaner.
2. Even weak acids such as vinegar, orange juice, cola, etc. will damage the stone plastic UV board. If these liquids are spilled on the surface of the stone plastic UV panel, they should be cleaned up in time and rinsed with water.
3. Only use warm water when cleaning the stone plastic UV board, because the warm water evaporates quickly.
4. Avoid using acidic detergents during nursing. They can corrode the polished surface of the stone plastic UV panel.